Back To Top
c

Origin Acoustics D82 DT/SUR

Model No: SCD2T80200

Features:
  • Stereo In-Ceiling Speaker
  • 8-Inch IMG Woofer
  • Dual Aluminum Tweeters
  • Zip-Cliq™ Mounting System

Product Inquiry Form

All fields marked * are required.

Inquire about: Origin Acoustics D82 DT/SUR
Required Information



Optional information





Director D82 DT/SUR

Stereo In-Ceiling Speaker Featuring An 8-Inch IMG Woofer, Dual Aluminum Tweeters And Zip-Cliq™ Mounting System

What about sound in those areas that don’t require or even allow for a stereo pair of speakers? The Director D82 DT/SUR will reproduce both the left and right channels from a single speaker. Now bathrooms, hallways, even walk-in closets can be filled with music. Or, with the flip of a switch, the DT can be turned into a dedicated rear-channel surround speaker.

Technology

Hand-Selected-Drivers.png

Hand Selected Drivers

Choosing the right drivers is part of the blend of art and technology that creates Origin Acoustic’s signature sound. The woofer cone in the D82 DT/SUR is made of Poly Rubber which offers low mass and durability. The silk dome tweeter pivots allowing the installer to direct the critical high frequencies toward the listening area.

X-Wave-Woofer-Surround.png

X-Wave Woofer Surround

While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround.

Progressive-Suspension.png

Progressive Suspension

As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver’s frequency range.

Compression-Molded-Woofer-Baskets.png

Compression Molded Woofer Baskets

Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance.

Zip-Cliq-Mounting-System.png

Zip-Cliq Mounting System

It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Zip-Cliq™ Mounting System (Patents Pending) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle.

Magnetic-Grille.png

Magnetic Grille

A paintable, perforated grille with a micro bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy.

 
Specifications
Model Number D82DT/SUR
Part Number SCD2T80200
Tweeter Dome Aluminum
Tweeter Diameter Dual 1" (25mm)
Woofer Cone IMG
Woofer Diameter 8" (203mm)
Frequency Response 38Hz-20kHz
Impedance 8 ohm
Recommended Amplifier Power 50 watts - 125 watts
Sensitivity 89dB +/- 3dB
Depth 4 1/2" (114mm)
Diameter 10" (254mm)
Cutout Diameter 8 3/4" (222mm)

No dimensions available for this product.

Specifications
Model Number D82DT/SUR
Part Number SCD2T80200
Tweeter Dome Aluminum
Tweeter Diameter Dual 1" (25mm)
Woofer Cone IMG
Woofer Diameter 8" (203mm)
Frequency Response 38Hz-20kHz
Impedance 8 ohm
Recommended Amplifier Power 50 watts - 125 watts
Sensitivity 89dB +/- 3dB
Depth 4 1/2" (114mm)
Diameter 10" (254mm)
Cutout Diameter 8 3/4" (222mm)